.2 Vs .23 Vs .25 Airsoft Fps

CO2 and green gas are the most mutual gasses used in airsoft forth with simple propane. Knowing that you lot can choose from each of these gases and knowing that each gas has unlike backdrop that will function with a whole range of advantages and disadvantages can seriously bear upon your airsoft experience.

In this guide, I will share what I know well-nigh these gases and what should be your optimal option in my opinion.

And so, let'south see what are the biggest differences between CO2 and green gas and their comparing with other gasses on the market such as propane, blood-red or black gas afterward in the post.

Advantages of CO2	Disadvantages of CO2	Advantages of greenish gas	Disadvantages of dark-green gas
Works well in a cold environs (below forty °F or four°C)	Wears internals of a gun slightly more than dark-green gas if used in airsoft guns that are non made specifically for CO2 or lower quality guns	Easy on inner parts, easy to install, use and maintain	Losses significant effectiveness in temperatures below twoscore °F or four°C
Higher pressure means more than velocity (FPS) and power for running the gun mechanism	Harder to install and maintain than greenish gas	Allows adjustment of FPS to pass MED requirements	Produces less velocity due to lower pressure level levels (bad for Snipers, DMRs, and some rifles)

The major difference between CO2 and green gas

What is CO2 and how information technology works?

A gas that's been stored nether not bad pressure unremarkably comes in 12 k capsules (800psi or 55bar.)

CO2 magazines are created in a fashion where you insert the capsule in it, which usually means that you empty the capsule before replacing the empty one with a new one. This also means that one time you insert the capsule you have to use it preferably in i go.

An opened sheathing can not exist stored or taken out of the magazine without leaking problems and y'all can not refill the CO2 capsules in any meaning.

This also leads to issues of not knowing how much CO2 is left in the capsule. This should not be a big deal considering you will get used to information technology and when you notice the capsule is empty, insert the new mag in the heart of the combat.

You will notice the capsule is virtually empty with your terminal 10 shots existence weaker and the gun volition produce softer dissonance.

You tin find more data regarding the handling of CO2 and answers to important beginner'due south questions in my post nigh CO2 often asked questions.

If yous are looking to buy CO2 y'all can find it in local stores, cycle stores, airsoft stores, and on Amazon.

What is greenish gas and how it works?

Light-green gas is stored under 145 PSI or 10 bar and is the same as propane but with added silicone oil for purposes of ameliorate lubrication while information technology likewise does non odour as bad equally propane. This makes dark-green gas a better selection than uncomplicated propane and information technology is a great choice for airsoft guns.

Green gas magazines are designed in a way where you lot can actually make full them with green gas instead of inserting cartridges in the openings. This means that y'all can behave a bottle of dark-green gas in your backpack and refill the magazines when needed. Nevertheless, having multiple magazines on accomplish while playing is recommended because it is hard to refill the magazine with green gas in the middle of the gainsay.

Green gas is stored under lower force per unit area levels than CO2, but in that location are variants of green gas such as red and blackness gas that can compensate for lack of power, and then for case the black gas is almost twice as pressured as green gas and ruddy gas is somewhere in-between.

Green gas is less available in stores from what I take seen and heard, but it can still be found in some local stores, airsoft stores, or on Amazon.

What are light-green gas variations?

Propane – A usual gas used in kitchen, fire stoves, for camping etc. Tin can be used in airsoft, simply information technology is not recommended unless you lot can keep your airsoft gun ever lubricated. This adds up more than responsibility and adventure while it does not help your upkeep much (and it besides smells terrible!).

Carmine gas – Same as green gas but red gas is stored under higher pressure which results in more velocity and may be a better option for cold environs (similarly as CO2 works in cold)

Blackness gas – A further improved version of rad gas that is stored under even greater pressure level and has enhanced effects

In my stance, neither red gas nor black gas should be used in airsoft unless you lot have a specific goal for the benefits they come up with. The reason is the higher price of these gases, and proper velocity and cold resistance can be accomplished with CO2 and green gas/propane already.

If you lot are a beginner you should not actually bother with Red and black gasses and they might ruin your gun internals.

1. Green gas is more beginner friendly

CO2 is stored at greater pressure and many believe that information technology should non be kept in the mag for a long fourth dimension, while many also believe that leaving green gas won't practice any harm if the gun is stored with information technology in information technology.

CO2 requires more maintenance (lubricating) and is harder to deal with if it starts to leak while green gas is simple to install, tin can be taken off and in whenever you want, and comes with added silicon oil which means yous will have less work lubricating your gun. Even so, you should still non forget to maintain your airsoft gun as indicated in the instructions!

2. CO2 works better in cold environs

CO2 has better cold resistance, so if y'all will be spending days in the cold environment you should choose CO2 because greenish gas merely can not keep its properties in a functioning shape in temperatures nether 40 °F (iv°C).

That said, it does not hateful that greenish gas will completely malfunction nether such temperature but information technology will result diminished in efficiency and fifty-fifty colder temperatures such as annihilation effectually 20 °F (-7°C) will brand information technology unusable.

In other words, when yous burn down your airsoft gun the BB will get projected as far as 30% of its potential.

CO2 in some other paw volition also get affected by the cold, only it is stored nether greater pressure and you will yet be able to get a solid efficiency from information technology fifty-fifty at temperatures below twenty °F (-seven°C).

Every gas gets impacted past the common cold, but I did not see a great loss in efficiency with CO2, although I presume that there is a minor difference.

I rarely experience common cold days where I live, then I practise not have to worry about this, but if I played with AEG in the cold environment I would also notice a reduced performance due to poorer efficiency of electricity in the cold environment.

In decision, airsoft guns always work ameliorate in warmer environments, and so it is not only the topic of CO2, dark-green gas, or electricity airsoft guns but also about other components that can be damaged in the cold which airsoft guns are made of (metal, plastic, safe).

3. CO2 is more than powerful than greenish gas

CO2 helps you achieve higher FPS, but the green gas allows you to adjust the fps based on which green gas you lot use. However, equally I mentioned at the start you won't need to look into blood-red and black gasses but it is proficient to know they exist.

That said, green gas will result in less FPS merely it will be past no means an unplayable FPS and commonly this will be a good affair, especially when in that location are MED requirements in the field.

CO2 will produce better functioning of the parts inside the gun, so you lot can wait that CO2 is better for blowback gas airsoft guns, it may produce a more than desired sound when the gun clocks and the added velocity may exist a good affair on certain rifles, DMS or snipers for outside plays.

four. There is non large departure in the price

When I took on measuring, I got the post-obit data.

On average, $15 of light-green gas tin can result in 1800 shots with a medium FPS non-blowback airsoft gun which ways a single shot costs 1.ii cents.

On other hand, 15$ of Co2 can result in 2200 shots with a medium FPS non-blowback airsoft gun which makes the cost per shot more affordable.

Still, a like CO2 FPS airsoft gun with a blowback characteristic resulted in 1170 shots for the same price.

If I owned a greenish gas blowback gun I would besides calculate how much would the difference of the greenish gas used be betwixt a non-blowback and a blowback version of a like airsoft gun. However, I tin can assume with conviction that a blowback feature would use lots of light-green gas and you would stop upwards with similar results.

In determination, CO2 might exist a bit cheaper per shot, but this might depend from market to market considering I have seen that the prices vary from store to store.

I have as well heard that non every store offers green gas while CO2 cartridges are near always available on the lager.

Cheque out your local stores or the place you are buying your airsoft stuff from and make a few calculations for a clear moving picture.

Tin a CO2 airsoft gun use green gas and vice versa?

In theory, you can use green gas in CO2 airsoft guns and vice versa just you lot should not do it. When you fill a CO2-designed airsoft gun with light-green gas it may not work every bit well because the greenish gas is stored under less pressure than CO2 which will upshot in a weaker bike and thus worse operation.

In another case, using CO2 in light-green gas-designed guns will issue in prematurely worn internals due to Co2 pressure levels existence upwardly to five times higher than greenish gas pressure level levels.

In some instances, at that place are airsoft guns that can have both without consequences if instructions say so.

You can then use a specifically designed magazine for either CO2 or green gas and continue using your airsoft gun if the magazine fits in.

Once again, READ Product INSTRUCTIONS CAREFULLY and employ the type of gas the gun is fabricated for unless otherwise is indicated.

Are green gas and CO2 poisonous?

Any gas should non be inhaled in large amounts because information technology tin cause headaches and respiratory problems, however, pocket-sized amounts are fine and won't hurt y'all.

Therefore, neither green gas nor CO2 is poisonous but can go dangerous in large amounts.

If the gas leaks it may hurt the skin, so endeavor to avoid gas getting in direct contact with your pare and if it does, clean the skin.

Which gas is ameliorate for airsoft? – The conclusion

There is not a simple winner between CO2 and green gas, but I adopt CO2 due to higher pressure levels that are meliorate for the blowback feature, and overall college FPS helps you achieve meliorate range, pair this with better cold tolerance and y'all can run across why I prefer CO2.

Light-green gas may exist a better option for CQB games where it is important to laissez passer the MED requirements, it is cheaper and easier to utilize.

In the end, consider these factors but as well stick to what your airsoft guns demands, if you have a green gas airsoft gun, use the dark-green gas and vice versa, and if you are yet deciding what gas airsoft gun to buy you can continue to explore this topic in my guide choosing between non-blowback and blowback gas airsoft guns.